AG Motorsport Posted September 29, 2020 Report Share Posted September 29, 2020 Says requires 1 digital input so can’t be on normal 0-5v analogue? Thanks Andrew Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 29, 2020 Report Share Posted September 29, 2020 Flex fuel sensors transmit two signals over one wire using a variable frequency and pulsewidth. Only the DI's 1-8 can interpret this. If your car doesnt have cruise control then you could splice into one of the cruise DI's (DI6 or 7) or if you have cruise then the easiest option is probably DI8 (originally the start signal, which is not very important). Quote Link to comment Share on other sites More sharing options...
AG Motorsport Posted September 30, 2020 Author Report Share Posted September 30, 2020 12 hours ago, Adamw said: Flex fuel sensors transmit two signals over one wire using a variable frequency and pulsewidth. Only the DI's 1-8 can interpret this. If your car doesnt have cruise control then you could splice into one of the cruise DI's (DI6 or 7) or if you have cruise then the easiest option is probably DI8 (originally the start signal, which is not very important). Thanks for your reply, also on CAN lamda,, is there any cam connection on main header for this or needs to go to expansion port ? Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 30, 2020 Report Share Posted September 30, 2020 1 hour ago, AG Motorsport said: also on CAN lamda,, is there any cam connection on main header for this or needs to go to expansion port ? Yes, CAN2 L is on the main header pin C35, and CAN 2 H is pin C27. CAN 2 and CAN 1 are also available on two 5 pin sockets internally (need a CANPCB cable to connect) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.