Guest |850| Posted January 19, 2012 Report Share Posted January 19, 2012 Hi all, Planning to use a V88 on a BMW S62 engine - anyone has the VVT values figured out, or even some base values to start working from? Thanks. Quote Link to comment Share on other sites More sharing options...
Guest |632| Posted January 20, 2012 Report Share Posted January 20, 2012 last time i spoke to simon there was a bmw plug in so im sure those values will be no issue... Quote Link to comment Share on other sites More sharing options...
Simon Posted January 23, 2012 Report Share Posted January 23, 2012 Unfortunately not to suit the V8 our plugin is for the 6 cylinder. Quote Link to comment Share on other sites More sharing options...
Apex Speed Tech Posted January 23, 2012 Report Share Posted January 23, 2012 Planning to use a V88 on a BMW S62 engine - anyone has the VVT values figured out, or even some base values to start working from? Unfortunately, the S62 is a real I/O hungry motor and there are few ECUs that can handle them. It has dual drive-by-wire throttles, and the V88 can only handle one. Each cam requires 2 drivers, so VANOS alone sucks up 8 aux outputs. Does Vi-PEC even support the cam triggers for the S62? -Neel Quote Link to comment Share on other sites More sharing options...
Simon Posted January 24, 2012 Report Share Posted January 24, 2012 You raise a good point. The S62 trigger pattern is not a listed option so would have to check it matches one of the other options. Quote Link to comment Share on other sites More sharing options...
Guest |850| Posted January 24, 2012 Report Share Posted January 24, 2012 The engine will be configured to run a single throttle body, so the number of I/O of a V88 is not problematic at this point. Quote Link to comment Share on other sites More sharing options...
Apex Speed Tech Posted January 24, 2012 Report Share Posted January 24, 2012 The engine will be configured to run a single throttle body, so the number of I/O of a V88 is not problematic at this point. I think we'll have to get Vi-PEC to write the trigger profile for it. -Neel. Quote Link to comment Share on other sites More sharing options...
Guest |850| Posted January 24, 2012 Report Share Posted January 24, 2012 That would be great. In any case if anyone can get me on the right track with a base cal file for this engine with clear VVT settings, that would be even greater :-) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.