Bananaman Posted November 30, 2020 Report Share Posted November 30, 2020 Am I correct in assuming from the piece above taken from the Link ECU help section the monsoon is capable of driving both high and low impedance injectors without the need to run an external Ballast? Quote Link to comment Share on other sites More sharing options...
Adamw Posted November 30, 2020 Report Share Posted November 30, 2020 Your snip is the specifcation for the ignition drives, not injector drives. The Monsoon injector drives are saturated type so you will need ballast resistors to limit the current through the injector. Note the purpose of the resistor is typically to protect the injector, not so much the ecu. If you put full current through a low impedance injector the windings inside will eventually melt and short internally. Quote Link to comment Share on other sites More sharing options...
Bananaman Posted November 30, 2020 Author Report Share Posted November 30, 2020 Great, thanks for the clarification. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.