B3mwe Posted March 2, 2021 Report Share Posted March 2, 2021 Hi all I have a link g4+ on my v2 impreza, I'm trying to use the GPS module for speed it's a haltech module on di4 and I have the ic7 dash connected I can't see any speed everything else works well Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 2, 2021 Report Share Posted March 2, 2021 Do you have valid speed showing in the ECU software? Is the DI function assigned as one of the wheel speeds? Quote Link to comment Share on other sites More sharing options...
B3mwe Posted March 2, 2021 Author Report Share Posted March 2, 2021 It's input on di4 as an lf wheel speed, I'm seeing nothing and the module is locked on as getting a steady green light as per there instructions Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 2, 2021 Report Share Posted March 2, 2021 It should be flashing green when the car is moving or the GPS is outputting a speed. Apparently you can test by holding the button down for 10sec and it will start pulsing the output at 60kmh. Quote Link to comment Share on other sites More sharing options...
B3mwe Posted March 13, 2021 Author Report Share Posted March 13, 2021 Hi yes I'm seeing a signal on my link how do I allow the data to my haltec ic7 dash is there a guide ? Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 13, 2021 Report Share Posted March 13, 2021 All that should be needed is in the dash set up put LF wheel speed on one of the display areas. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.