JeremiahJ Posted April 2, 2021 Report Share Posted April 2, 2021 Hi all, I'm having trouble with my Monsoon g4+ ecu, which is Trigger 1 arming keep rising with Hardware Block 2 Error. Ecu failing? Blessed Friday to all. jeremiah. 63904997371__12822C68-5C54-4721-80CC-077958871A92.MOV when i unplugged battery terminal for all power liked yesterday , then connect it back this morning , turn ign on, open pclink, trigger 1 arming is 0.3v , then after few minutes running idle 1000rpm it will rise to 6v - 8v Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 2, 2021 Report Share Posted April 2, 2021 From memory the block error 2 is something to do with the trigger circuit. The arming threshold shouldn’t change by itself. So I would suggest you contact [email protected] to get a service form and return the ecu for inspection. It will likely be a repair or replacement under warranty. JeremiahJ 1 Quote Link to comment Share on other sites More sharing options...
JeremiahJ Posted April 3, 2021 Author Report Share Posted April 3, 2021 4 hours ago, Adamw said: From memory the block error 2 is something to do with the trigger circuit. The arming threshold shouldn’t change by itself. So I would suggest you contact [email protected] to get a service form and return the ecu for inspection. It will likely be a repair or replacement under warranty. thanks for the reply Adamv. i'll contact tech@linkecu then. cheers Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.