amvegeta Posted April 6, 2021 Report Share Posted April 6, 2021 Hi, I want to plug this 2 sensors on my link g4, how can i do?https://prosportgauges.com/products/premium-oil-fuel-pressure-senderhttps://prosportgauges.co.nz/products/prosport-oil-and-water-temp-sensor-scarles regards!! Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 6, 2021 Report Share Posted April 6, 2021 The pressure sensor needs 3 wires from the ECU - 5V, sensor ground & an analog input. The temp sesnor needs 2 wires - sensor ground and an analog temp input. I wouldnt recomend either of them - the temp sensor doesnt even have a calibration, and the pressure sensor calibration they quote looks wrong compared to typical 3 pin pressure sensors. Quote Link to comment Share on other sites More sharing options...
amvegeta Posted April 8, 2021 Author Report Share Posted April 8, 2021 ok, what do you recommend to me then? I think I saw a sensor on the link site that did both! Quote Link to comment Share on other sites More sharing options...
amvegeta Posted April 12, 2021 Author Report Share Posted April 12, 2021 This https://dealers.linkecu.com/CPTS Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 12, 2021 Report Share Posted April 12, 2021 Yes those are a good option and hard to beat value wise. Quote Link to comment Share on other sites More sharing options...
amvegeta Posted April 13, 2021 Author Report Share Posted April 13, 2021 ok thanks!!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.