billsy Posted April 11, 2021 Report Share Posted April 11, 2021 I've put a Plug n Play G4x in my Legacy GTB. this is more for feedback or anyone else who might encounter this. 1998 GTB Legacy (single turbo converted), running later 36,2,2,2 trigger wheels, GTX3076, ID1000's etc etc Obviously its setup now in wasted spark using paired COP's via the adapter board, but I found that the coil paring on cyl2 and 4 were switched around. I just swapped the coil plugs, which conveniently reach the other coils after re routing the loom a little. instead of repinning or modifying the adapter board, but just wondering if this is a thing with these? going forward, id like to unlink the pairings, change the outputs and rewire the adapter board for proper sequential ign, as id like to use antilag and launch control without risking a crossfire with retarded wasted spark. Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 11, 2021 Report Share Posted April 11, 2021 To free up ign outputs 3 & 4 you will have to move the 2 fan wires to ign 7&8 on the expansion port, then move your coil 3 & 4 wires to the ign 3/4 pins. billsy 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.