434josh Posted April 13, 2021 Report Share Posted April 13, 2021 I have a powertune dash and they instructed me how to create a custom stream for my Extreme g4+ however it's not working. Can you see anything wrong with this? https://www.dropbox.com/s/72uxzw9mffn5kw7/received_146843757300618.jpeg?dl=0 https://www.dropbox.com/s/i5h68qsqpwzx5ay/received_167221011922966.jpeg?dl=0 https://www.dropbox.com/s/iz08nsass7wokun/received_280292776907150.jpeg?dl=0 https://www.dropbox.com/s/0a1aqcxyd7os8ov/received_3953717551353074.jpeg?dl=0 Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 14, 2021 Report Share Posted April 14, 2021 Did their instructions definately say to enable this frame ID? It is pretty unusual to use a frame ID when you are only sending one frame. Otherwise the rest of your setup looks ok for how I would expect it to work. Can you share their instructions? Quote Link to comment Share on other sites More sharing options...
434josh Posted April 14, 2021 Author Report Share Posted April 14, 2021 11 minutes ago, Adamw said: Did their instructions definately say to enable this frame ID? It is pretty unusual to use a frame ID when you are only sending one frame. Otherwise the rest of your setup looks ok for how I would expect it to work. Can you share their instructions? He just sent me screen shots and said to match them exactly. I can load his screen shots if you would like, will just take me a min to get them into dropbox. This was his screenshot. https://www.dropbox.com/s/7dugr327s9lozxc/received_449372886345529.jpeg?dl=0 Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 14, 2021 Report Share Posted April 14, 2021 In that case you have done as he suggested. Seems very odd to use a compound ID when only a single frame is being sent so it wouldnt hurt to get him to confirm that that was not a mistake, otherwise the ecu is set up correctly. Quote Link to comment Share on other sites More sharing options...
Tye Posted March 16, 2023 Report Share Posted March 16, 2023 On 4/13/2021 at 5:16 PM, 434josh said: He just sent me screen shots and said to match them exactly. I can load his screen shots if you would like, will just take me a min to get them into dropbox. This was his screenshot. https://www.dropbox.com/s/7dugr327s9lozxc/received_449372886345529.jpeg?dl=0 Did you ever get this figured out? Im trying to do the exact same thing on my car. I have my Fuel level sending unit wired into ECU and reading Percentage data on PC link, but i'm trying to figure out the CAN programming side of things. Thanks Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 16, 2023 Report Share Posted March 16, 2023 Do you have a powertune dash? It should work set up as per their manual. https://cdn.shopify.com/s/files/1/0036/0615/1235/files/Custom_stream_setup_LINK.pdf?v=1620629266 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.