lemmy01 Posted June 22, 2012 Report Share Posted June 22, 2012 After doing a Cam-Test i get a clear signal for Inlet/RH Exh/LH Exh./RH but for Inlet/LH i get a "Signal Error:2nd Cam pulse". The Inlet/LH is not wired to Di1 is wired to trigger2 and as trigger2 i have a good signal. What i have made wrong? map https://rapidshare.com/files/1265057566/ralfmr2vers3.pcl Quote Link to comment Share on other sites More sharing options...
Simon Posted June 25, 2012 Report Share Posted June 25, 2012 The only thing I think that might be causing it could be that your main offset is a long way from 0 where we are expecting it to be. The Cam edges in the image are only 2deg from where we are expecting them to be. Quote Link to comment Share on other sites More sharing options...
lemmy01 Posted June 25, 2012 Author Report Share Posted June 25, 2012 I split the + wire from the Inlet/LH sensor and wire it to digital1 too and it works. Disable the Trigger2 V VTI (CamType off) Whats the reason for that behavor? I noticed that trigger2 have Raising and Digital1 have failing edge ( offset 51° ) so my offsets(51,172,21,140) 1-4 Quote Link to comment Share on other sites More sharing options...
Simon Posted June 25, 2012 Report Share Posted June 25, 2012 You can try changing the edge on trigger 2 and see if that will work. It should give you the same cam trigger points. But your main offset will need to be checked again.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.