soondin Posted April 27, 2021 Report Share Posted April 27, 2021 Idle control is okay. Confuse is manual said AUX1 for close AUX2 for open. But PCLInk displayed AUX1 is open AUX2 is close. What is correct one? Cause I do wiring FuryX to E36(MS41) and almost ready to start engine (Trigger and Igniter ready). Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 27, 2021 Report Share Posted April 27, 2021 In G4X the wiring can work either way, but the outputs will always be labelled as you show in the picture above. So dont worry about the wiring too much, as long as one terminal is connected to aux one and the other side to aux 2 it will work fine. If idle speed control works backwards then change the "Aux 1 Active State" setting in idle speed control setup screen which reverses the behaviour. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.