Pageperf Posted May 1, 2021 Report Share Posted May 1, 2021 Attached is a base start file for a 1uzfe running a Stormx with the Haltech Can Wideband controller. I've seen posts on this but no real specifics on setup. Real simple. Should work for g4x and g4+ Moderators feel free to move if necessary Parameters are: In gp inputs: Lambda 1=Link Can Lambda 2=Link can Can Setup: Channel 1=Link Can-Lambda/mode=Link Can - lambda/ CAN ID=950/FORMAT=normal Channel 2=Link Can-Lambda/mode=Link Can - lambda/ CAN ID=951/FORMAT=normal stormxk201uzfestock.pclx Quote Link to comment Share on other sites More sharing options...
Adamw Posted May 1, 2021 Report Share Posted May 1, 2021 Turn off channel 2, you should only have one channel assigned to CAN lambda with the base ID 950. You can receive up to 8 CAN lambdas all on that one channel. Pageperf 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.