neo277 Posted May 14, 2021 Report Share Posted May 14, 2021 Hey all. wiring up a mxs strada dash and wanted to make sure before wiring up CAN low - #4 on CAN F plug, Regarding the diagram is the picture looking into the front of the CAN F plug as in where it plugs into the pcb connector or is the diagram picture looking into the pin side of the CAN F plug where the wire goes into the connector? My guess is the diagram picture is where it plugs into pcb connector. Thanks Z Quote Link to comment Share on other sites More sharing options...
Adamw Posted May 14, 2021 Report Share Posted May 14, 2021 The pic above is looking into the connector on the CANPCB cable. CANF pinout from help file below. Quote Link to comment Share on other sites More sharing options...
neo277 Posted May 14, 2021 Author Report Share Posted May 14, 2021 Thank you so looking into the back of the connector (where the can wire connects into the connector) #4 CAN L is at the 4 o’clock position, Quote Link to comment Share on other sites More sharing options...
Adamw Posted May 15, 2021 Report Share Posted May 15, 2021 Yes. Quote Link to comment Share on other sites More sharing options...
neo277 Posted May 15, 2021 Author Report Share Posted May 15, 2021 50 minutes ago, Adamw said: Yes. Thank you for the confirmation. cheers Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.