More complicated traction control setup

[Scott33]

Currently traction control allows for 1 or 2 tables.  It'd be nice if it could be extended to support:

1. One table

2. Two tables, chosen by switch

3. Two tables, interpolated by third 2D table

4. Two tables, interpolated by third 3D table

5. Two tables, added.  For example, if table 1 calculates to 5% slip and table 2 calculates -2% slip, then the actual target is 3%.

6. Two tables, multiplied.  For example, if table 1 calculates to 5% slip and table 2 calculates 80% multiplier, then the actual target is 4% (0.05 * 0.80 = 0.04).  Note this seems very similar to #4; but would actually support percentages greater than 100%.

The first three are the standard for boost control.  The last two would provide some interesting ways of allowing multiple variables, such as combining lateral G, speed, throttle position, and a driver operated traction dial (not just a switch).

I would like this for G4+ (since there is no G4x Force GDI)

[0x33]

I believe they have stopped major development on G4+, so unlikely this will happen. Might have more luck with G4X platform, but TC works completely differently in G4X anyway.