Ricochet Posted December 5, 2012 Report Share Posted December 5, 2012 I am getting this ECU fault code 75: E throttle TP target error and causing it to go to limp mode? How can I resolve this? Thanks Quote Link to comment Share on other sites More sharing options...
llabmik2 Posted January 27, 2013 Report Share Posted January 27, 2013 Clear all the codes, then do a TPS cal and a throttle body cal under the throttle menu (Ethrottle setup mode). Then make sure you check to make sure the codes are clear again. Do a store, and then start the car. See if the codes are cleared. I have had one car where I had to do all this and leave it in setup mode for it to work right. As soon as I took it out of setup mode it would throw the code at me again and go into limp mode. Quote Link to comment Share on other sites More sharing options...
Simon Posted January 27, 2013 Report Share Posted January 27, 2013 You might also need to adjust the target table to a max of 98% open so its always able to reach the target. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.