wood Posted December 19, 2021 Report Share Posted December 19, 2021 Hello! I need hlep. Can ecu link moonsoonx use with 1jz-ge? I custom trigger1 tooth12 missing1. If it work how to set fuel main injection? Quote Link to comment Share on other sites More sharing options...
Adamw Posted December 19, 2021 Report Share Posted December 19, 2021 Is the crank wheel 12-1? Does it still have a cam senor connected? Quote Link to comment Share on other sites More sharing options...
wood Posted December 19, 2021 Author Report Share Posted December 19, 2021 Yes 12-1 and cam senor already connected. 15 minutes ago, Adamw said: Is the crank wheel 12-1? Does it still have a cam senor connected? 15 minutes ago, Adamw said: Is the crank wheel 12-1? Does it still have a cam senor connected? 15 minutes ago, Adamw said: Is the crank wheel 12-1? Does it still have a cam senor connected Quote Link to comment Share on other sites More sharing options...
Adamw Posted December 19, 2021 Report Share Posted December 19, 2021 Ok, then you need to use multitooth/missing trigger mode. Settings below. For ignition mode it will have to be wasted spark. For injection mode you can use multipoint group or semi-sequential. For semi-sequential the injectors will have to be wired in specific pairs as per the note below. Quote Link to comment Share on other sites More sharing options...
wood Posted December 20, 2021 Author Report Share Posted December 20, 2021 do you have base map of MoonsoonX.? for 1Jz I tried my best but couldn't set it up.:( 21 hours ago, Adamw said: Is the crank wheel 12-1? Does it still have a cam senor connected? 21 hours ago, Adamw said: Is the crank wheel 12-1? Does it still have a cam senor connected? 21 hours ago, Adamw said: Is the crank wheel 12-1? Does it still have a cam senor connected Quote Link to comment Share on other sites More sharing options...
wood Posted December 20, 2021 Author Report Share Posted December 20, 2021 active drives don’t have INJ1-3?! Quote Link to comment Share on other sites More sharing options...
Adamw Posted December 20, 2021 Report Share Posted December 20, 2021 Set active drives to Inj 1-4. If you attach the map you have set up I will take a look. Quote Link to comment Share on other sites More sharing options...
wood Posted December 20, 2021 Author Report Share Posted December 20, 2021 Is this correct? When starting, the ignition do not work. 66168608056__F3038F60-0770-482F-9F17-86676DD263EB.MOV Quote Link to comment Share on other sites More sharing options...
Adamw Posted December 20, 2021 Report Share Posted December 20, 2021 Can you attach your map, and a log of it cranking. Quote Link to comment Share on other sites More sharing options...
wood Posted December 20, 2021 Author Report Share Posted December 20, 2021 Is this right? Quote Link to comment Share on other sites More sharing options...
Adamw Posted December 20, 2021 Report Share Posted December 20, 2021 No, that is a trigger scope. For a log press F8 to start recording, try starting the engine and then F8 again to stop recording. Then go to >Logging>save log file as. For the map, go to >file>save as. Quote Link to comment Share on other sites More sharing options...
wood Posted December 21, 2021 Author Report Share Posted December 21, 2021 66175480311__B2BC4E9B-40FA-495E-8952-C06D0362F63B.MOV I'm not sure if like this? Quote Link to comment Share on other sites More sharing options...
Adamw Posted December 21, 2021 Report Share Posted December 21, 2021 I cant view your video. You are probably best to contact your dealer for help if you dont know how to do a log. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.