ASchutte Posted January 27, 2013 Report Share Posted January 27, 2013 Hi, Im im trying to setup my E-throttle with this configuration : LS2 - 2005 Corvette engine Standard E-throttle body with Chevy Equinox FPS (6-pin) V88 The FPS Calibration works perfect. My problem is when i do a TPS calibration i get Error 16 : Cannot reach 98% When the cal starts i the Main runs to 100% and Sub runs to 100% but then when they run together (step 8) i get the error message. My the throttle body seems to "snap" between 95%-100% repetitively on this step. Can anyone give me some details,advice on how to setup the PID Settings for the LS2 Throttle body. P51UZ 1 Quote Link to comment Share on other sites More sharing options...
Simon Posted January 27, 2013 Report Share Posted January 27, 2013 Check that you target table is spanned off FPS not TPS. Pid as a starting point would be P of 6 I of 0.14 D of 30 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.