Turbokarlsen Posted March 11, 2022 Report Share Posted March 11, 2022 Hello, i am looking for a startup map/file for a Bmw s50b30 turbo. (itb) Link ecu g4+storm. Quote Link to comment Share on other sites More sharing options...
Turbokarlsen Posted June 6, 2022 Author Report Share Posted June 6, 2022 Nothing? Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 7, 2022 Report Share Posted June 7, 2022 Not a very common engine in these parts, I dont think I have even ever seen one in my life... If you cant find anything, for the basic fuel setup I would suggest you copy our nissan GTR base map. Main fuel table has TP as the load axis. Equation load source = MAP. Lambda target table load axis MAP or MGP. Tune the main fuel table on lowest boost setting. Then test at highest boost setting, if lambda stays on target then that is all you need. In some cases you with a restrictive turbine you will find lambda will trend rich at high RPM when on the high boost setting, if this happens then enable a 4D fuel table (always on), with MAP on the load axis. You can then pull a little bit of fuel out at the topend under high boost - so most of this table will be zeros. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.