Garret_Volden Posted April 10, 2013 Report Share Posted April 10, 2013 i am a total newbie. i bought the vipec to get into tuning and a few complication arose with my car while on the dyno, not once but twice and now two tuners in alberta owe me dyno time. i have a rb25det NEO from a r34 skyline gtt. it has a gt35r and was tuned with stock injectors and made 297 hp. i put in 840cc injectors now and am wondering if i can autotune it to make it at least driveable to get an alignment done. please feel free to flame if you want I am good natured and am posting to learn, i just need help so i can get an alignment and get it dyno re tuned when i can get time off work. please let me know if there is a autotune guide or if anyone can guide me through the autotune process. thanks, Garret Quote Link to comment Share on other sites More sharing options...
Simon Posted April 10, 2013 Report Share Posted April 10, 2013 If you know the size of the original injectors you can do a calculation to work out the percentage change in size and then adjust the Master fuel by that percentage. So if you go 25% bigger the master will need to be reduced by 25% and this will get you very close assuming no other changes have been made. I would suggest leaving a bit of a buffer and only reduce master to a level that leaves thing a little rich. Quote Link to comment Share on other sites More sharing options...
Garret_Volden Posted April 10, 2013 Author Report Share Posted April 10, 2013 do you know if i would be able to adjust the master fuel and then just select auto tune now and drive it and let the vipec do its thing? i just dont want it to grenade on me. Quote Link to comment Share on other sites More sharing options...
Simon Posted April 11, 2013 Report Share Posted April 11, 2013 If you have a way of keeping an eye on the mixtures as long as you don't go to lean or excessive rich you will be ok. And of course don't go thrashing the pants off it. Just use light throttle light load. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.