JamesM Posted March 16, 2022 Report Share Posted March 16, 2022 Hi, Have G4+ with Dash2Pro comms via Can1. All data except speed is viewable on Dash2pro. DI1 RF speed input to G4+ can see data, Have Calibrated gear position on G4+ & that info is shown. Any clues guys. G4 to Dash2pro.pclr Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 16, 2022 Report Share Posted March 16, 2022 The dash2pro stream transmits non-driven wheel speed. Go to the speed sources menu and set non driuven wheel speed source to RF - you can set both driven and non driven to RF if you wish. Quote Link to comment Share on other sites More sharing options...
JamesM Posted March 16, 2022 Author Report Share Posted March 16, 2022 Problem sorted, Cant use the Speed screen on the Dash2Pro - have to use another segment & assign to ECU Speed. Link G4+ had assigned DI1 RF Speed as driven source - Can stream only out only allows for Non Driven speed. Reassigned in link to this & now have speed input to Dash2Pro -- This wont allow for km travelled or odometer function Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 16, 2022 Report Share Posted March 16, 2022 The last time I used a dash2pro the speed worked in the correct speed field. Did you load the dash2pro config that is in PC Link? Is your speed readout settings set like this: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.