ryota Posted March 26, 2022 Report Share Posted March 26, 2022 In terms of Set Base Timing, I have a question. In case 1)Lock ignition timing to 10 degree 2)See actual timing as 12 degree by using timing light Then, What value should I input to "adjust offset until ignition timing" column of set base timing? 2 is correct? or -2? Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 26, 2022 Report Share Posted March 26, 2022 Subtract 2 from the current value (if it is currently zero then it will become -2). Make sure you hit the enter key after typing the number in, it should turn blue to show it has been changed. Quote Link to comment Share on other sites More sharing options...
ryota Posted March 26, 2022 Author Report Share Posted March 26, 2022 Thank you for the reply. You mean if I put +2 (Not -2) to the "adjust offset until ignition timing" column, actual ignition timing will be adjusted to 10 degree in this case? Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 26, 2022 Report Share Posted March 26, 2022 No, if you want to retard timing by 2 degrees then input -2 Quote Link to comment Share on other sites More sharing options...
ryota Posted March 26, 2022 Author Report Share Posted March 26, 2022 It’s clear, thank you for the detail. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.