art leong Posted May 8, 2013 Report Share Posted May 8, 2013 I checked the AC voltage coming from my crank sensor (it is a CPS reluctor pickup from a Honda S2000) It reads from 12/13 volts at an idle (900 rpms) to 25 volts at 6000 rpms. What values should I put in the trigger arming threshold table? 7 seems to be the highest it will allow. Would it be benificial to use a different pickup? Quote Link to comment Share on other sites More sharing options...
Simon Posted May 9, 2013 Report Share Posted May 9, 2013 The arming voltages should be about half the peak voltage. In thins case the signal is nice and strong so you can run high arming voltages I would suggest start at 1V and work up to about 5V In theory if the trigger signals had no noise on them you could run a 0.2 arming voltage all the way. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.