PhuVy Posted April 26, 2022 Report Share Posted April 26, 2022 Hello all, my subaru v5-6 no boost control, i used GrimmSpeed boost solenoid 2 wire to AUX 2 and GND OUT. I turned on TEST(PWM) 10Hz and pulse signal measurement. That my pulse chart and setup in subaru v5-6, is it normal? Can someone help me with my problem. Sorry my english is not good. Subaru v5_6.pclr Quote Link to comment Share on other sites More sharing options...
Vaughan Posted April 26, 2022 Report Share Posted April 26, 2022 The boost solenoid should be Aux 2 and an ignition switched power not a ground. The Aux 2 pin is pulled to ground by the ECU to turn the solenoid on. Quote Link to comment Share on other sites More sharing options...
PhuVy Posted April 26, 2022 Author Report Share Posted April 26, 2022 1 hour ago, Vaughan said: The boost solenoid should be Aux 2 and an ignition switched power not a ground. The Aux 2 pin is pulled to ground by the ECU to turn the solenoid on. Oh! That my wrong, thank you so much. Vaughan 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.