07_wrex Posted June 10, 2013 Report Share Posted June 10, 2013 I have a 2007 Subaru STi. I finally got my v88 plug-in board up and running well. Pump gas and race gas maps are done. I setup switching between fuel/ignition table 1 and 2 by using the cruise switch (DI 10). This works great. However, The only way for me to verify which tables are active is for me to lug my laptop around with me...or guess that it's the right map and nothing blows up. I'd rather not guess. So I set out to try to setup one of the dash lights to be on when fuel/ignition table 2 is active. But "DI 10" is not showing up as an option for the gp output function. I'm trying to get the gp output to switch on the cruise light "injector drive 6" when the cruise switch "DI 10" is pressed. It obviously would be better for it to be on when table 2 is active as that's the race gas map and will be used the least. But I realize that may not be an option and that I may just end up with it on for one setting and off for the other. That is fine too, I will know which is which. I have attached a screen shot of what I'm talking about. Thanks for the help, Sean Quote Link to comment Share on other sites More sharing options...
07_wrex Posted June 10, 2013 Author Report Share Posted June 10, 2013 Maybe I need to assign the DI 10 "cruise light" to something else? Worse comes to worse, I could wire my own led. But it would be awesome if this could be done with factory stuff since the cruise control isn't operational with a standalone. Quote Link to comment Share on other sites More sharing options...
Simon Posted June 11, 2013 Report Share Posted June 11, 2013 Hi photo should cover it. Quote Link to comment Share on other sites More sharing options...
07_wrex Posted June 11, 2013 Author Report Share Posted June 11, 2013 Perfect! Thanks a lot! For me specifically: IGN6 (cruise light for 2007 STi) is set to GP output. And then setup just like the above picture. Thanks again Simon! You have really been a big help! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.