BoostLee Posted June 22, 2013 Report Share Posted June 22, 2013 I have the older Knocklink box (analog 0-5 ouput) and could not for the life of me figure out why this new version of the Vipec SW wasn't able to record anything other than the input from the sensor, no Knock levels or anything :? . I then realized that the Analog Knock mode was no longer listed on the Knock Mode list. :evil: The previous version of the SW had the following options: OFF ON - AN Knk Interface ON - DI Knk Interface Now the only thing options are... OFF ON - DI Knk Interface Looking through the feature changes list for version 4.x.x.1540, I don't see this item anywhere. How can I have my Analog Knock input as a feture without having to revert to the older version of the s/w? Quote Link to comment Share on other sites More sharing options...
Simon Posted June 24, 2013 Report Share Posted June 24, 2013 This option was removed as it failed to work very well and was not often used. Only option is to use older firmware. Quote Link to comment Share on other sites More sharing options...
BoostLee Posted July 24, 2013 Author Report Share Posted July 24, 2013 It works quite beautifully for me in 4.9.3.1194. I don't really see any features in subsequent versions that I rely on, but in the future (espcecially as you're now approaching the V5 major revision) what will happen? Will I be stuck with the Jurassic Version? Thanks Quote Link to comment Share on other sites More sharing options...
Simon Posted July 25, 2013 Report Share Posted July 25, 2013 There will continue to be small fixes but if you wish to use the analogue version of knock you will be stuck on your current firmware. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.