blp.auto Posted August 19, 2022 Report Share Posted August 19, 2022 This is my first venture into using a Link ECU and I am a little confused as to how to wire in the AEM wideband it is part number 30-4110 Quote Link to comment Share on other sites More sharing options...
blp.auto Posted August 19, 2022 Author Report Share Posted August 19, 2022 It would appear Link possibly forces you to purchase an Auxillary input/Output harness thats not included? https://dealers.linkecu.com/XSL_2 Or is there another way to do this? Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 19, 2022 Report Share Posted August 19, 2022 The easiest option is an expansion loom, but you probably have usused analog inputs on the main header or in the engine bay too. There are 2 narrowband o2 sensor inputs that you probably arent using (Volt 1 & 7), or there is the MAF input (Volt 4), in the cabin there is Volt 10 available on the SIL pin in the OBD2 connector. You can connect your wideband - or any other sensor to anyone of these. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.