ajabsheh Posted September 28, 2022 Report Share Posted September 28, 2022 Hello, Hows it going? I have a Link G4X StormX ECU that I have been trying to connect to an AEM cd-05 dash Through the AEM CD Dash Vi-Pec/Link ECU PNP Adapter Harness. The dash powers up but doesn't read anything. It has been set up through the pre made file for link ecu on the AEM dash design software. I am wondering if you can help guide me through the CAN setup on the Link ecu stormx Any help is appreciated. Thank you Ali Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 29, 2022 Report Share Posted September 29, 2022 Can you attach your ecu map and the config from the dash. Quote Link to comment Share on other sites More sharing options...
ajabsheh Posted October 2, 2022 Author Report Share Posted October 2, 2022 Hi Adam, Sorry about the late reply was away for work. please find attached requested files. ajabsheh.pclr Link_G4+.aemcd7 Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 2, 2022 Report Share Posted October 2, 2022 Moved to G4+ section as your ECU is not a G4X. Your map is password protected, please unlock it. Quote Link to comment Share on other sites More sharing options...
ajabsheh Posted October 3, 2022 Author Report Share Posted October 3, 2022 Hi Adam, I have sent you the password of the file in messeges Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 3, 2022 Report Share Posted October 3, 2022 You need to set the ID to 1000 and the transmit rate to 20Hz. Quote Link to comment Share on other sites More sharing options...
ajabsheh Posted October 7, 2022 Author Report Share Posted October 7, 2022 Hi Adam, i setup the can as shown above but still facing the same issue. i uploaded a dash layout that outputs CAN 1 and CAN 2 connections and both say they are disconnected. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.