jrizing Posted October 24, 2022 Report Share Posted October 24, 2022 Hi, I've recently upgraded from a G4+ to a G4X and found that none of my virtual aux channels are not working. Even if I set a virtual channel to be permanently on, there is no indication on the runtime values. Could this be a bug in the software? I've attached my map could you please investigate. G4X transfer 241022.pclx Quote Link to comment Share on other sites More sharing options...
Vaughan Posted October 24, 2022 Report Share Posted October 24, 2022 quick look at your basemap shows Virtual Aux 1 is active and 2, 3, 4, 5, 6 and 8 are inactive with 7 being off, do you have a log or screenshot of what you're looking at that doesn't do what you expect it to? Quote Link to comment Share on other sites More sharing options...
jrizing Posted October 24, 2022 Author Report Share Posted October 24, 2022 When the car is on they will all show inactive even if i test each virtual Aux but for some reason virtual aux 1 shows up as active when the car is off. What I find strange is that they work fine on the G4+ and I had no issues. Quote Link to comment Share on other sites More sharing options...
Vaughan Posted October 24, 2022 Report Share Posted October 24, 2022 If the engine is running and no fault codes are present the CE Light output (Virtual Aux 1) will be inactive. Virtual Aux 2 needs it's sw condition values specified, I suspect you want them to be '='. Virtual Aux 3, 4, 6 & 8 also need their sw conditions specified. Quote Link to comment Share on other sites More sharing options...
jrizing Posted October 24, 2022 Author Report Share Posted October 24, 2022 Ok I will try that, thank you. Quote Link to comment Share on other sites More sharing options...
jrizing Posted October 25, 2022 Author Report Share Posted October 25, 2022 All working now, thank very much. Vaughan 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.