Elliot j Turner Posted March 7, 2023 Report Share Posted March 7, 2023 Hey I have a g4+ plug n play and are wiring sensor using the expansion 1 harness. Just wanting to confirm if the wiring in the drawing is correct. Thanks in advance. Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 7, 2023 Report Share Posted March 7, 2023 Yep that all looks ok. Note the boost switch doesn't necessarily need to switch to 5V, it can switch to 12V or sensor ground, or chassis ground, whatever is most convenient. Quote Link to comment Share on other sites More sharing options...
Elliot j Turner Posted March 7, 2023 Author Report Share Posted March 7, 2023 Thanks heaps adam, I thought I was on the right track just was not confident enough to pull the trigger. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.