Marty RX Posted April 9, 2023 Report Share Posted April 9, 2023 Hi We have the power steering control wires connected to DI9 & 10 wires on the ECU and are trying to set this up on Can 2 Chanel but are unsure of the settings. Can anyone help? Marty Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 9, 2023 Report Share Posted April 9, 2023 You could try setting it to Mini R50-53 mode assuming they have the same EPAS unit. Otherwise you will need a working OEM car to reverse-engineer the messages. Quote Link to comment Share on other sites More sharing options...
Marty RX Posted April 10, 2023 Author Report Share Posted April 10, 2023 Tried this already just need to know how to assign the DI 9&10 to the Can 2 Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 10, 2023 Report Share Posted April 10, 2023 9 hours ago, Marty RX said: Tried this already just need to know how to assign the DI 9&10 to the Can 2 You dont need to assign anything, If you have the CAN 2 mode set to anything other than OFF in the CAN setup screen then DI9/10 are disabled and the B27/28 pins are CAN2. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.