jozef molnar Posted April 23, 2023 Report Share Posted April 23, 2023 I have just installed a g4x plug and play into my jzx100. The base map is loaded onto the ecu triggers seem to be working and have calibrated the tps, however haven’t wired in my iat because I don’t have it yet (just trying to start the car) when I test spark individually they work and same with the injectors, and when I plug the factory ecu in it fires up straight away. As soon as I plug the link back in and go to crank it’s says %ignition and %fuel at 100% guessing this is a fail safe and don’t know how to get around it/fix it. Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 23, 2023 Report Share Posted April 23, 2023 The forum is broken today and not allowing files to be attached, so I suggest for a fast response send an email to [email protected] with a copy of your tune and a short log of it cranking. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.