blutunesefi Posted May 7, 2023 Report Share Posted May 7, 2023 Hi, Whenever I attempt to edit any table values, the graph position resets itself to the default position. It makes it very difficult to see what I am doing. I am using the latest 6.23.15 g4+ pclink software Quote Link to comment Share on other sites More sharing options...
Adamw Posted May 8, 2023 Report Share Posted May 8, 2023 Are you talking about the surface view of a table? Do all tables give you the same issue or only a certain type? Quote Link to comment Share on other sites More sharing options...
blutunesefi Posted May 8, 2023 Author Report Share Posted May 8, 2023 Hi, it was the surface view and I also had issues with the logger and the gauges. The gauges were stuck at all red color and the logger colors for the time plot were not able to be changed. I also was not able to define the min and max values for the time plot. Any display setting that I tried to change it would just default back to what is was before. but I solved all these issue by following the steps in this thread. I'm almost certain this problem was caused by changing the settings under Options>Directories. I was trying to change the log file directory to save to a different folder, and right after I did this is when I started experiencing these issues. But everything is working as it should now. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.