azmak Posted May 9, 2023 Report Share Posted May 9, 2023 Hello everyone. Tell us about it. The car is a BNR32 (RB26DETT). I would like to copy the data file created using the G4+ plug-in to the newly purchased G4X plug-in. I cannot open the G4+ data file in PC-LINK of G4X. Quote Link to comment Share on other sites More sharing options...
Confused Posted May 9, 2023 Report Share Posted May 9, 2023 The two are incompatible, which is why you can't open the old in the new. There is no automated import of configuration from G4+ to G4X. You will do best by opening a copy of each application, and going through the configuration bit-by-bit, comparing old settings with the new settings (and Help documentation) to configure in the new method, as many things have changed substantially. It is really important to read the documentation for G4X, even if you think you know how it works in G4+, because things are different - one example is Triggering - this had me stumped for a few hours troubleshooting before I RTFM and saw that I was using the wrong settings, as I'd copied it blindly from the G4 Quote Link to comment Share on other sites More sharing options...
azmak Posted May 9, 2023 Author Report Share Posted May 9, 2023 Thank you for your guidance. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.