Adam McCreery Posted May 10, 2023 Report Share Posted May 10, 2023 I'm trying to receive GPS speed from the C125 in to the link G4X ECU. Is this possible? Racegrade has some info on sending GPS from C125 to M150 and I am wanting to figure out a way to do similar. Thanks. https://www.milspecwiring.com/DATA SHEETS/RG/RG_TN-0016 GPS CAN transmit to M1 via dash.pdf GC8 DRAG CAR.c125v64 Quote Link to comment Share on other sites More sharing options...
Adam McCreery Posted May 10, 2023 Author Report Share Posted May 10, 2023 I found this and will give it a go in the morning. TTP 1 Quote Link to comment Share on other sites More sharing options...
Adamw Posted May 10, 2023 Report Share Posted May 10, 2023 Set up ecu like below will match your dash config. When choosing the parameter in the user stream make sure you check the receive filter at the top right of the selection box. Use a CAN Freq channel. Set up your speed source in the ecu as CAN freq * with a calibration of 0. TTP 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.