azmak Posted May 24, 2023 Report Share Posted May 24, 2023 Hello everyone. NISSAN BNR32 RB26DETT G4X plug-in is used. Is it possible to control the stock Boost Control Solenoid? If so, can it be controlled up to about 230kpa? Quote Link to comment Share on other sites More sharing options...
koracing Posted May 24, 2023 Report Share Posted May 24, 2023 I don't know what the stock solenoid and wastegate spring setup is good for, but there should be an output (Aux 8 on pin 25) that does control the solenoid. Given it is a bleed off type solenoid, you should have controlled boost up to about double what the minimum boost level is, but it depends on if the stock solenoid can function well as a PWM solenoid. Quote Link to comment Share on other sites More sharing options...
azmak Posted May 26, 2023 Author Report Share Posted May 26, 2023 Thank you for your guidance. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.