rasheedn Posted April 20, 2013 Report Share Posted April 20, 2013 Hi there, I am trying to connect my KS4 to a Storm ecu As per this thread http://www.linkecu.com/forums/G4Forum/889514279?b_start=0#989964662 it says to connect it to AN Volt So i connected it to An Volt 4 But on the Knock Control setup , it says 'ON - DI Knk interface' and its not working should i move it to a digital input ? Thanks Quote Link to comment Share on other sites More sharing options...
Simon Posted April 22, 2013 Report Share Posted April 22, 2013 Do you have the option in your firmware of Knock external AN? Later firmware removed this option as it was not very effective. If not then all you can do is set the AN volt to a GP 0-5 input and log the level Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.