Autotech Posted June 27, 2023 Report Share Posted June 27, 2023 I am laying out the wiring for this Honda K24. I have the Link A & B 2.5m looms. In wiring the intake cam sensor, I'm wondering if I can use the existing shielded "knock 2" lead and repin to "DI4" for intake cam signal. I see most info indicates using DI1 on A loom, but DI4 on B loom should work? Also I'm wondering if in using the knock lead and its attached ground circuit, would this disrupt my knock sensor signal as I know that is probable a sensitive circuit. Thanks for your input... Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 27, 2023 Report Share Posted June 27, 2023 That would be fine. Quote Link to comment Share on other sites More sharing options...
Autotech Posted June 28, 2023 Author Report Share Posted June 28, 2023 Thank You Adam Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.