oetoet Posted June 29, 2023 Report Share Posted June 29, 2023 hi guys, i have a 2006 forester 2.5XT in my workshop wich i installed a WRX104X. full map completed a while ago with 400hp. now i am trying to get the cruise control to work. the car has an original 3 wire subaru switch, and on the original ecu it worked. i have measured the 3 wires to all ecu pins and only DI10 seems connected so maybe i need to rewire the other 2 wires. i can toggle the cruise on and off through DI10 input, but i cant seem to measure any voltage changes at the other 2 pins when operating the switch. do you guys have any experience with this? thanks! forester jw final.pclx Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 29, 2023 Report Share Posted June 29, 2023 Im pretty sure this model would use the older 3 x digital input system. Set the cruise switch type to "Subaru Cruise Switch", then assign DI6 & 7 to Cruise SwA/SwB. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.