GeeSupra Posted July 4, 2023 Report Share Posted July 4, 2023 Iv recently done trans swap on my jzs80 with a cd00a transmission, and now looking for a solution to gaining speedo signal. Car does not have abs is a link pnp ecu , what I'm looking for is diagrams from thos that have also done this swap and how u went about setting up wiring and gaining speedo signal ur help will b greatly appreciated Suppra Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 4, 2023 Report Share Posted July 4, 2023 The supra usually has a hall effect sensor that generates a 12V square wave signal connected direct to the speedo. The speedo then sends out a speed signal to the ecu. So your easiest option would probably be a cheap GPS speed sensor wired straight into the same wiring as the stock sensor used. Otherwise you could use an industrial hall sensor on a custom bracket pointed at one of the driveshaft bolts or similar, but since this would likely need scaling to get the correct speed you would do the wiring differently - it would have to be wired direct to the ecu first, then the ecu would send a modified signal to the original speed sensor wire via an aux output. Example GPS sensor: https://a.co/d/15OcMFT Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.