ninjanick Posted July 6, 2023 Report Share Posted July 6, 2023 I have an AEM 30-0334 that came with an ODB2 connector. Is there any connecting harness that I can purchase to wire the CANBUS to an ECU? AEM suggests to use the analog output, but would prefer to use CAN if possible. Perhaps cut the connector off and wire direct? Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 6, 2023 Report Share Posted July 6, 2023 As far as I know that specific gauge doesnt output AEM's normal "AEMNet" CAN messages, it is designed to work with OBD2 loggers or scan tools such as efi live by "pretending" it is an ecu and responding to OBD2 requests. Our ECU's arent designed to work like a scan tool so they dont do any OBD2 requests that would be required to make this thing talk. Im afraid analog output is probably the only option. Quote Link to comment Share on other sites More sharing options...
ninjanick Posted July 7, 2023 Author Report Share Posted July 7, 2023 Thanks Adamw! I was afraid of that. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.