TOMMYFD Posted July 23, 2023 Report Share Posted July 23, 2023 Hi guys. i would like to know the procedure of checking my base timing on my Rx7 FD S6. Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 24, 2023 Report Share Posted July 24, 2023 Quote Link to comment Share on other sites More sharing options...
TOMMYFD Posted July 24, 2023 Author Report Share Posted July 24, 2023 Thanks the trailing split table should i undo it after the calibration and put the numbers I had before? Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 24, 2023 Report Share Posted July 24, 2023 Correct, you just want the -20 in there while doing the timing check. You can right click on the table then do >im port/export>export to file to save a copy of the table before doing the calibration, then import it back in afterwards. TOMMYFD 1 Quote Link to comment Share on other sites More sharing options...
TOMMYFD Posted July 24, 2023 Author Report Share Posted July 24, 2023 Thanks man Quote Link to comment Share on other sites More sharing options...
TOMMYFD Posted September 1, 2023 Author Report Share Posted September 1, 2023 The timing light i should have it on atdc 20? Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 2, 2023 Report Share Posted September 2, 2023 If your timing light has an advance setting on it, set this to 0. If you are following the above procedure then with the timing light clamped on trailing 1 lead, your timing light should show the 20ATDC mark aligned. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.