Vasilis Posted August 3, 2023 Report Share Posted August 3, 2023 Hi there, My old display link was getting unreadable and decided to install an mfd28 from canchecked. The main problem I am facing is that every time I switch off the ignition the display loses the signal. I then have to go to the can setup page in pc link and just press apply. My second issue the wrong oil pressure reading e.g displays 0.3bar instead of 3bar. I will post my setup file later. thanks vasilis Quote Link to comment Share on other sites More sharing options...
Rally037 Posted August 9, 2023 Report Share Posted August 9, 2023 drop canchecked a note - they will get back to you. But - having configured one, here's some help. In the canchecked TRI files, enter enhanced mode. Open the oil pressure TRI. You'll see a field for initalCALC (mathematics functions) about half way down. Enter 0.1 and your display will now read 3 bar. Your ECU is likely to be wired ignition on so will go down on key off. Have you saved the config by hitting F4 and F2 in the PClink? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.