SweMike Posted August 7, 2023 Report Share Posted August 7, 2023 Hey all, I have a Hardwire PDM15, blink 12button keypad and the G4x wire-in. The PDM is controlling the keypad. I now want one button to activate/deactivate ALS in the G4x, how do I do this? Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 8, 2023 Report Share Posted August 8, 2023 Stream 1 should look like below to receive that button into the ECU as CAN DI4. Make sure you have the receive filter button set when adding the parameter. Quote Link to comment Share on other sites More sharing options...
SweMike Posted August 8, 2023 Author Report Share Posted August 8, 2023 It doesent work, can you se whats wrong in my attachments? Thanks! DRIFTFAMILY 2JZ VVTI G4X.pclx Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 9, 2023 Report Share Posted August 9, 2023 In the PDM, turn off the "CAN Stream" on the first window since it is not clear what ID's that is using. In the CAN output 1 window change the send mode to periodic and frequency 10, the rest should be ok. In the ECU CAN setup, you have stream 1 set up to both transmit and send so turn off the transmit. Make sure you have the same bit rate set on both. Quote Link to comment Share on other sites More sharing options...
SweMike Posted August 9, 2023 Author Report Share Posted August 9, 2023 Ok thank, will try later. Quote Link to comment Share on other sites More sharing options...
SweMike Posted August 9, 2023 Author Report Share Posted August 9, 2023 Still can't get it to work :-/ DRIFTFAMILY 2JZ VVTI G4X.pclx Senaste update.hwpdm Quote Link to comment Share on other sites More sharing options...
SweMike Posted August 9, 2023 Author Report Share Posted August 9, 2023 2 hours ago, SweMike said: Still can't get it to work :-/ DRIFTFAMILY 2JZ VVTI G4X.pclx 471.07 kB · 0 downloads Senaste update.hwpdm 66.01 kB · 0 downloads Resolved! Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 9, 2023 Report Share Posted August 9, 2023 What did you change? It looks ok in the config above from what I can see. Quote Link to comment Share on other sites More sharing options...
SweMike Posted August 9, 2023 Author Report Share Posted August 9, 2023 51 minutes ago, Adamw said: What did you change? It looks ok in the config above from what I can see. The can stream tab in the first window had to be activated. Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 9, 2023 Report Share Posted August 9, 2023 Hmm that is odd, the context help says that just enables the fixed generic output stream which sends out all the IO statuses etc. Quote Link to comment Share on other sites More sharing options...
SweMike Posted August 11, 2023 Author Report Share Posted August 11, 2023 On 8/10/2023 at 12:39 AM, Adamw said: Hmm that is odd, the context help says that just enables the fixed generic output stream which sends out all the IO statuses etc. I tried turning stream off, and it still works now. New problem with the keypad not turning on background light as I've ajusted it to. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.