Brad Foreman Posted August 9, 2023 Report Share Posted August 9, 2023 ive finally figured out how to configure the razor but have yet to test in the car i am running multiple fuel pumps. 2 high pressure pumps and 1 lift pump i have them wired and configured on the pdm as hc1 - high pressure pump 1 hc2 - high pressure pump 2 adio 5 and adio 6 bridged for my lift pump in the ecu i have the fuel pump configured as CAN AUX 1 so in the pdm i select HC1 to CAN AUX 1. but i cant select multiple outputs to be triggered off the same CAN AUX input am i missing something as i want them all to come on at the same time when i prime the engine for start up thanks Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 9, 2023 Report Share Posted August 9, 2023 Yeah this situation is a bit painful currently, you need a separate function for each pin. So something like below is how I would do it, 3 GP functions looking at CAN function 1. There is planned to be a better way to link pins in a future update. Quote Link to comment Share on other sites More sharing options...
Brad Foreman Posted August 9, 2023 Author Report Share Posted August 9, 2023 awesome thats actually awesome i was hoping i didnt have to asign my ecu to have 4 fuel pumps on 4 different CAN AUXs thanks thats awesome im stoked Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.