Asimo Posted August 10, 2023 Report Share Posted August 10, 2023 Want to ask about the OEM knock sensor is it working with evo8 pnp G4X, on manual oem sensor pin into ecu 78, do I need to RE wire? Quote Link to comment Share on other sites More sharing options...
K4Tuning Posted August 10, 2023 Report Share Posted August 10, 2023 Hey you shouldnt have to wire anything if your sensors and wiring are stock. If its a PnP ecu then everything should be set up already. You will just need to load in the appropriate base map and do all of your general set up such as TPS calibration, Injector data, MAP calibration, all that other stuff and it should work as things get set up. Let us know if you get it working orneed further help. Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 10, 2023 Report Share Posted August 10, 2023 No you dont need to rewire, it is all there ready to set up. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.