Jump to content

Recommended Posts

Posted

Have just purchased a Storm wire-in, and need a base map just to see it running and possibly to drive to the tuners. It has 650cc injectors (side feed), forged pistons, TO4E turbo, storked to a 3.2 etc etc etc. If anyone has something similar to this (although any 30DET map should do the trick) could you please send the file to me at [email protected]. Cheers, Louis.

Posted

Hi Louis.

There are a couple of Nissan base maps in the 'Base Maps' folder when PCLink is installed.  This might be what you are after.  These are not tuned maps, but rather start up maps (they are designed for a factory injectors and so on though).  Good enough to drive on to a trailor or dyno, but not to thrash around the block with.

Once you have tested all the in/outs with the test on function to prove all is wired OK, set your base timing and triggering etc... A quick twiddle on the master fuel number should see you start up alright.

Jurgen

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...