troyj Posted October 5, 2023 Report Share Posted October 5, 2023 Im having trouble with wiring the air temp sensor into the factory wiring iv wired it as to the wiring diagram on the link wiring diagram and it not reading iv checked pin at ecu to the wire and its definitely it iv tried everything i can think off just reads -40 also want to use the other wore anvolt 8 for fuel pressure and same thing . Rest of my sensors I've wired into the xs connector work fine. Just the ones using factory loom don't wanna work. Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 5, 2023 Report Share Posted October 5, 2023 Can you attach your tune. Are you connecting the temp sensor and fuel press to the MAF plug in the engine bay or to the expansion loom? Quote Link to comment Share on other sites More sharing options...
troyj Posted October 6, 2023 Author Report Share Posted October 6, 2023 im wiring the air temp to temp2 on the engine bay airflow meter loom and was hoping to use anvolt8 on the other wire on that same airflow meter loom. i haven't ran the car yet only just plugged it in for now to sort this wiring, any chance you could set up a fuel map to run it as its got 1300cc id injectors . donnys wrx.pclx Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 6, 2023 Report Share Posted October 6, 2023 It looks like none of your analog sensors are reading correctly when you saved that map. Are coolant, MAP and APS showing correctly when you are viewing the ecu live? Quote Link to comment Share on other sites More sharing options...
troyj Posted October 6, 2023 Author Report Share Posted October 6, 2023 Oh yeah iv got them unplug but work when plugged in cause i had inlet manifold off Quote Link to comment Share on other sites More sharing options...
troyj Posted October 6, 2023 Author Report Share Posted October 6, 2023 Allgood iv worked it out now thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.