kaan sanver Posted October 12, 2023 Report Share Posted October 12, 2023 Hello Everyone; I have vipec v88r3 (link g4+) ecu,I use it on personal watercraft,I connected Haltech IC7 display via CAN line,I entered the health information as stated in the Haltech help menu ,then the ıc7 started working,but it shows errors in ecu can connection,I would appreciate it if you could help me on this issue. I measured the can line with a multimeter and saw 60 ohms. There is a screenshot attached Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 12, 2023 Report Share Posted October 12, 2023 Is it a Yamaha or Seadoo ecu? Is the dash connected to the CAN in the expansion pigtail or the CAN H/L on the main connectors? Do the CAN errors prevent the dash from working? Do the CAN errors still appear if you only switch on the ignition but do not start the engine? Quote Link to comment Share on other sites More sharing options...
kaan sanver Posted October 12, 2023 Author Report Share Posted October 12, 2023 Hello @Adamw I have yamaha v88r3 ecu,I took the CAN outputs from the pin outputs on the ecu and installed them via CAN 2,Errors only when the ignition is on, the engine is not yet running,All data comes to the display Quote Link to comment Share on other sites More sharing options...
kaan sanver Posted October 13, 2023 Author Report Share Posted October 13, 2023 The problem is solved, Link ecu is Jose from the technical department, he advised me to reduce the bitrate from 1mbit to 500kbit and all the errors were corrected, thank you for your interest. Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 13, 2023 Report Share Posted October 13, 2023 Yes, the reason 500K is needed is this ECU has a module connected to CAN2 internally to control the original K-line dashboard, this K-Line module is fixed at 500K. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.