Jump to content

Link V5

Dan Rae

Recommended Posts

Hi I'm trying to wire in a V5 to run a 1uz-fe. It was originally set up in a Soarer piggy backing the factory loom/ECU. As such the Link was not wired into the fuel pumps. I have now connected the pump to the Link but when I turn the ignition on the pumps won't run. When I bridge the 12v power supply and the pump out put on the connector the pumps will run. Both earths and 12 V are good. Does the Link need to be configured to run the pumps? Or is it something else? Cheers

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...