CalleFFA Posted November 17, 2023 Report Share Posted November 17, 2023 Hey, hoping someone can see where I went wrong here: 2005 Subaru STI (usdm) Link G4x sn: 513160 knock sensor not reading AT ALL confirmed sensor is good (new OEM ntk) Wiring between sensor and ecu ohms good Confirmed we are wired to pin C25 per wiring diagram Have tried various gain (10-40) and frequency settings PC Datalog - 2023-11-16 3;40;10 pm.llgx FFA-CM Subaru WRX V10 G4X Jayden 94-OCTBST 18.5PSI SWITCHENBLD v1.4 AN8.pclx Quote Link to comment Share on other sites More sharing options...
Adamw Posted November 17, 2023 Report Share Posted November 17, 2023 Allocate the cylinders to a knock table and it will work. Quote Link to comment Share on other sites More sharing options...
CalleFFA Posted November 17, 2023 Author Report Share Posted November 17, 2023 That did the trick, thank you so much! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.