LeFryGuy Posted December 10, 2023 Report Share Posted December 10, 2023 I have a G4X Plug and play ecu on my EG Civic. I had recently swapped to a T1 Cam Trigger. It is Wired per instructions from T1. On Scope it seems to be an erratic signal and I am not getting any sort of RPM Readout when cranking. The settings I have set for it from My tuner are pictured below. Any Help is greatly appreciated. Thanks! Quote Link to comment Share on other sites More sharing options...
Adamw Posted December 10, 2023 Report Share Posted December 10, 2023 The wiring needs to be a bit different than suggested above. Crank signal should go to B16 and cam signal to B12. Quote Link to comment Share on other sites More sharing options...
LeFryGuy Posted December 10, 2023 Author Report Share Posted December 10, 2023 Thank you for the input. I’ll change that and see what I get Quote Link to comment Share on other sites More sharing options...
LeFryGuy Posted December 10, 2023 Author Report Share Posted December 10, 2023 Swapped to B16 and B12 and now I have rpm readout. Went to do a scope capture though and wasn’t getting anything from it. Quote Link to comment Share on other sites More sharing options...
Adamw Posted December 11, 2023 Report Share Posted December 11, 2023 Are you clicking the capture button on the trigger scope only when the engine is cranking, not before? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.